How to Fix Distorted Audio in Adobe Audition: 2024 Step-by-Step Guide🔎

In the realm of audio production, ensuring pristine sound quality is paramount, but removing distortion from audio can be a daunting challenge. Fortunately, Adobe Audition offers an array of powerful tools and features to tackle this issue effectively.

Whether you're an audio enthusiast or a seasoned professional, mastering the art of fixing distorted audio in Adobe Audition is an essential skill that can transform your recordings.

In this comprehensive guide, we will explore proven techniques and step-by-step methods to bring clarity back to your audio projects. Let's get started.

What Causes Audio Distortion

Audio distortion is the alteration of sound quality, causing artifacts and unwanted frequencies, degrading the listening experience.

Audio distortion can stem from several factors, resulting in undesirable background noises or distortion. Common culprits include clipping, where audio signals exceed recording or playback limits, leading to cut-off peaks and harsh sounds.

Overloading audio equipment beyond its capacity can also introduce distortion. Additionally, background noise like electrical hum or hiss, frequency interference, and acoustic problems like room reflections, echoes, or improper microphone placement may degrade audio quality.

Digital compression, faulty equipment, and signal distortion during conversion can further contribute to the issue. Understanding these causes enables the effective implementation of techniques to clean up audio in Adobe Audition.

How to Clear out Distorted Audio in Adobe Audition

Then how to remove background noise in Adobe Audition? We already know the causes of distorted audio, next, it's time to take targeted measures.

1. Using DeClipper Effect🎙️

The DeClipper effect fixes clipped waveforms by replacing clipped sections with new audio data caused by exceeding the maximum level for the current bit depth. Clipped audio visually appears as flat areas at the top of a waveform, resulting in static-like distortion.

There is also a DeClicker effect that identifies and eliminates clicks and pops originating from various sources, such as wireless microphones, vinyl records, and more. But we'll mainly focus on the former now.

Fix clipped audio in Adobe Audition with DeClipper Effect

Step 1. Import the distorted audio file.

Launch Adobe Audition, go to "File" > "Open" or "Import" to load your audio track. Double-click the track to get the audio waveform.

Step 2. Diagnose your distorted audio.

Select "Windows" > "Amplitude Statistics" > "Scan". You can see the "Possibly Clipped Samples" section after it scans.

Step 3. Use the DeClipper effect.

Select "Windows" > "Diagnostics" > "DeClipper", and choose the preset from heavy, light, or normal degree. Hit "Settings" to configure other features.

• Gain Setting: Specify attenuation level before processing; use "Auto" based on average input amplitude.
• Tolerance: Set amplitude variation for detecting clipped regions; 0% detects perfectly horizontal lines at max amplitude, and 1% is recommended for most clipping.
• Min. Clip Size: Choose the length of the shortest run to repair; lower values fix more samples; higher values require proximity to other clipped samples.
• Interpolation: Cubic option uses spline curves for faster processing, FFT option employs Fast Fourier transforms for severe clipping; choose FFT Size for accuracy and processing time.

Step 4. Scan and repair.

Click "Scan" to check out and hit "Repair All" to fix the distorted wave.

Step 5. Export the audio.

Go to "File" > "Save as" or "Export" to get the final result.

You can also watch the video guide by Mike Russell.👨‍💻

• 0:00 Intro
• 0:33 Fix
• 2:22 Outro

2. Using Spectral Frequency Display🎤

The Spectral Frequency Display in Adobe Audition is a visual representation of audio frequencies over time. It allows for targeted edits to remove unwanted elements like noise, hum, and clicks from the audio spectrum, resulting in cleaner audio recordings.

Clean up bad audio in Adobe Audition with Spectral Frequency Display

Step 1. Open Audition, import the audio file and double-click the track.

Step 2. On the top left corner of the panel, find the icon to show the spectral frequency display.

Step 3. Press Shift + D now on your keyboard.

Step 4. Check where your frequencies are if there are sibilants, highlight and see the Hz value.

Step 5. Go to "Window" > "Frequency Analysis", and zoom in on the frequency of that value.

Step 6. Take out the targeted audio.

Share these essential tips on fixing distorted audio in Adobe Audition now!

3. Using Adaptive Noise Reduction🎚️

The Adaptive Noise Reduction effect swiftly eliminates variable broadband noise like background sounds, rumble, and wind. It operates in real time and can be combined with other effects in the Effects Rack and applied in the Multitrack Editor. For optimal results, use it on selections starting with noise followed by desired audio; the effect identifies noise from the initial few seconds of audio.

Eliminate audio distortion in Adobe Audition with Adaptive Noise Reduction

Step 1. Start Audition and drag and drop your audio track. Double-click it on the file panel.

Step 2. Navigate to "Effects" > "Noise Reduction/Restoration" > "Adaptive Noise Reduction".

Step 3. Configure the settings.

• Reduce Noise By: Adjusts noise reduction level (6-30 dB recommended) for bubbly background effects.
• Noisiness: Indicates the percentage of original audio containing noise.
• Fine Tune Noise Floor: Manually adjust the noise floor above/below the auto-calculated floor.
• Signal Threshold: Manually adjusts the threshold of targeted audio above/below the auto-calculated threshold.
• Spectral Decay Rate: Fine-tunes noise reduction for fewer artifacts (short values cause bubbly sounds, long values create reverb effect).
• Broadband Preservation: Retains desirable audio in specified frequency bands around found artifacts (lower settings remove more noise).
• FFT Size: Choose high for frequency resolution (artifacts of long duration) or low for time resolution (transient artifacts).

Step 4. Play the audio and click "Apply".

Care for more related articles for other tools?

4. Using Noise Reduction🎛️

The noise reduction effect significantly reduces background and broadband noise while preserving signal quality. It effectively removes various types of noise, such as tape hiss, microphone background noise, and hum, which persist consistently throughout the waveform.

Get Rid of distortion from audio in Adobe Audition with Noise Reduction

Step 1. Start Audition and open the audio track, then turn it into the waveform.

Step 2. Follow the path: "Effects" > "Noise Reduction/Restoration" > "Capture Noise Print".

Step 3. Select the target audio section or the entire track (shortcut key: Command + A).

Step 4. Back to the "Effects" > "Noise Reduction/Restoration" > "Noise Reduction" to set up the options.

• Scale: Choose Logarithmic for low frequencies or Linear for high-frequency work.
• Channel: Displays selected channel with consistent noise reduction.
• Select Entire File: Applies noise print to the entire file.
• Noise Reduction: Controls reduction percentage with minimized artifacts.
• Reduce By: Determines amplitude reduction of detected noise.
• Output Noise Only: Preview noise without affecting desirable audio.

Step 5. Click the triangle icon for advanced settings.

• Spectral Decay Rate for greater noise reduction with fewer artifacts.
• Smoothing to adjust the variance of the noise signal.
• Precision Factor for amplitude changes, Transition Width for audio fade.
• FFT Size for frequency band analysis, and Noise Print Snapshots for capturing accurate data.

Step 6. Click "Apply" and export the audio track.

5. Using Frequency Analysis🎧

Use Frequency Analysis to locate problematic frequency bands and then you can modify them with a filter effect.

Wipe off bad audio in Adobe Audition with Frequency Analysis

Step 1. Import the bad audio into your Audition and display it in the waveform.

Step 2. Go to "Window" > "Frequency Analysis", and the window pops up.

• Scale: Choose a logarithmic or linear frequency display.
• Copy All Graph Data: Copies frequency data to the clipboard.
• Hold buttons: Take up to eight frequency snapshots during playback.
• Display: Choose between Lines, Area, or Bars style for the graph.
• Top Channel: Select a channel to display over others (Average for combining channels).
• Scan or Scan Selection: Displays average frequency data from the entire file or selection.

Step 3. Select and delete the faulty part directly.

Step 4. Or go to "Window" > "Noise Reduction/Restoration" > "Noise Reduction" to use the effect or choose "Filter and EQ" to select a filter for advanced settings.

Step 5. Export the audio.

6. Using EQ📣

Graphic equalizers enable adjustments across the frequency range, but they affect a range of frequencies around the target. On the other hand, parametric equalizers let you precisely boost or cut specific audio frequencies.

Clear out distorted audio in Adobe Audition with EQ

Step 1. Double-click the audio track to activate the waveform.

Step 2. Select the audio and go to "Effects" > "Filter and EQ" > "Graphic Equalizer".

Step 3. Adjust the parameters.

• Gain: Adjust with sliders and Master Gain for overall level.
• Range: Control the slider's range with the Range field.
• Accuracy: Choose the Accuracy level for frequency response.
• Presets: Use presets like 1965, Cymbal Shimmer, Vocal Magic, Generic Mud Removal, or Destination-Home Theater, and customize.

Step 4. Or use "Parametric Equalizer" under the "Filter and EQ" tab.

7. Using Automatic Click Remover🎶

Use Automatic Click Remover for quick removal of crackle and static in vinyl recordings. Correct a large area or single click with real-time operation, and combine it with other effects in the Effects Rack. The effect automatically applies to multiple scan and repair passes.

Clean up bad audio in Adobe Audition with Automatic Click Remover

Step 1. Import the audio file and activate the waveform.

Step 2. Go to "Window" > "Noise Reduction/Restoration" > "Automatic Click Remover".

Threshold: Adjust sensitivity to noise. Lower settings detect more clicks and pops but may retain desired audio. Range: 1 to 100; default is 30.

Complexity: Controls noise complexity. Higher settings may affect audio quality. Range: 1 to 100; default is 16.

Step 3. Apply the settings.

Clean up Bad Audio for Windows in EaseUS VideoKit

EaseUS VideoKit is a powerful video editor for Windows that comes equipped with advanced tools to help you remove distortion from both audio and video files. With its user-friendly interface, you can easily clean up noisy audio, eliminate background hum, and fix distorted sounds.

Free DownloadSupport Windows&macOS Free DownloadSupport macOS&Windows

Whether you're dealing with audio clips or videos, EaseUS VideoKit offers a seamless solution to enhance the overall quality of your multimedia content. You can also use it to separate vocals from background noise, compress videos of 1000+ formats, generate video subtitles using AI, and extract audio tracks intelligently.

Here's a guide to wiping off distorted audio from video.

Step 1. Download and launch the software EaseUS VideoKit, and click on the Video Editor feature.

Step 2. Then you need to choose Add Files to open the video you want to change.

Step 3. After that, you can click on the Audio icon.

Step 4. In the Audio section, drag the Volume bar to zero, and click on the Save option.

Step 5. And then, you can freely export the video file while choosing different resolutions, qualities, formats, encoders, and frame rates as you like.

Final Thoughts

In conclusion, by using Adobe Audition's powerful tools like DeClipper, DeClicker, and Adaptive Noise Reduction, you can effectively fix distorted audio and eliminate unwanted noise.

For a comprehensive audio and video editing solution for Windows, EaseUS VideoKit offers advanced features to remove distortion from both audio and video files, providing a seamless editing experience for professional-level results.

Free DownloadSupport Windows&macOS Free DownloadSupport macOS&Windows

How to Fix Bad Audio in Adobe Audition FAQs

1. How do you fix heavily distorted audio?

To fix heavily distorted audio, you can follow these steps:

• Identify the cause of distortion, such as clipping or background noise.
• Use a compressor to reduce occasional peaking.
• Apply noise reduction to minimize unwanted noise.
• Utilize EQ to balance frequencies and reduce harshness.
• Normalize the audio to a standard level.
• Check hardware connections for issues.
• Fine-tune settings in your audio editing software.

2. How do you fix audio quality in Audition?

To improve audio quality in Adobe Audition, you can follow these steps:

• Launch Adobe Audition.
• Go to the "Effects" > "Noise Reduction / Restoration" > "Capture Noise Print".
• Select the audio and click "Effects" > "Noise Reduction / Restoration" > "Noise Reduction".
• Drag the sliders to adjust the amount of noise reduction.
• Click "Preview" to check it out and "Apply" it.

3. How do I fix muffled audio in Adobe Audition?

To fix muffled audio in Adobe Audition, try this:

• Open Audition and go to "Effects" > "Filter and EQ" > "Scientific Filter…".
• Cut out the high-end frequencies and listen to the audio.
• Click "Apply" when it sounds clear.