How to Remove Robot Voice in Audacity [2024 Full Tips]

Dawn Tang updated on Aug 19, 2024 to AI Article

Robot voice in your audio is a result of recording errors and overprocessing of audio effects. Learn how to remove robot voice in Audacity with this detailed tutorial. Also, find an easier alternative to remove robot voice online for free.

Robot voice in your audio can be really irritating and is a result of various factors. The recording errors and overdoing of post-processing effects can take a toll on your audio and make it sound metallic or robotic.

If you are also troubled by the inclusion of robot voice, you have to work around a few filters in Audacity to get rid of it. Learn how to remove robot voice in Audacity with a detailed Audacity tutorial and the best vocal remover.

Why Your Audio Sound Like a Robot

Many factors contribute to your audio to sound like a robotic voice. Let us look at the reasons for robotic voice and good practices to know how to enhance audio quality.

1. Echo and Communication issues: The robotic voice can sometimes be introduced in the recording setup rather than in audio processing. If any of the instruments introduce echo or distortion, it will degrade the audio quality. 

2. Audio Processing and Mic Technique:

Similarly, the metallic voice or robotic tint can also result from some audio processing. 

  • Overprocessing: If you are overusing audio effects like compression, normalization, or Audacity noise gate, they can strip away the natural dynamics of the audio and make it sound unnatural.
  • Low Input Volume: If you are someone with a low voice and use effects to boot voice in post-processing, it will exaggerate noise and add the robotic tint. Also, learn how to remove vocals from a song in Audacity, if the voice is low.

Let us see what we can do to address the issue by following some good recording and editing practices:

  • Record your audio with the best possible quality. Ensure your microphone is set properly and you have a quiet room to remove echo from audio in Audacity
  • Use noise reduction before anything else to remove the unwanted noise. If you apply various effects without filtering out the unwanted noise, you enhance them along with the audio.
  • Use the effects moderately to enhance the audio. Try and test various levels to find the best one before applying it to the audio.

Do not hesitate to spread the word to help others in need!

 

Remove Robot Voice in Audacity Step-by-Step

Now, if your audio is affected by robotic or metallic tint, you can use the open-source program Audacity to correct it and make it sound natural. Let us know about the effects we will be using to remove the robot voice in detail.

  • Noise Gate: It is impossible to avoid unwanted noises even with studio-level equipment. While processing, we must remove those voices using noise reduction in Audacity
  • EQ (Filter Curve EQ): Equalization allows us to manipulate sounds of various frequencies.  You can increase volumes of some frequencies and reduce others. You can use EQ for click removal Audacity.
  • Clip Fix: Audio clipping happens when a signal exceeds the maximum limits of the recording, seen as flattened tracks in DAWs. Audio clipping introduces distortion and harsh and unpleasant sounds. 

Let us dive right into how to use these effects to remove robotic voice in Audacity:

Step 1. Open the Audio file in Audacity.

Step 2. At first, we use the "Noise Gate" to derive a "Noise Profile" and remove the unwanted noises in the audio. 

Select a part of the noise with no actual audio (external noise), and navigate to "Effects" > "Noise Removal and Repair" > "Noise Reduction." 

Click on "Get Noise Profile" to generate a noise profile for the audio. This effect also helps you to know how to remove breathing from audio in Audacity.

Now, press "Ctrl + A" to select the complete audio. Again, go to the "Effects" > "Noise Removal and Repair" > "Noise Reduction" settings.

Adjust the Noise Reduction, Sensitivity, and frequency sliders to control the amount of noise reduction. Click on "Preview" to check the audio, and "OK" if you are satisfied.

Step 3. Now, we will use the "Clip Fix" effects to adjust the audio clipping and restore the audio in a natural way.

Come back to the landing page, go to "View" > "Show Clipping (on/off)" and see the clipping. You will find the audio clippings in red.

Now, Navigate to "Effect" > "Noise Removal and Repair" > "Clip Fix" and open it.

Clip Fix offers two values to apply to the audio:

  • Threshold clipping (%): This parameter allows you to set a threshold percentage considering the maximum level above which the audio is considered clipping. The recommended value is 95%.
  • Reduce amplitude to allow for restored peaks (dB): This allows you to create headroom for repairs while reducing the Amplitude of the selected region. The default value is -9 dB.

Step 4. Let's work with various sounds to go up or down the frequencies. You can do this with "Filter curve EQ." Try turning down the sounds to remove vocals if Audacity vocal remover not working.

Select the audio, and "Effects" > "EQ and Filters" > "Filter Curve EQ." Here, you will see a graph with frequencies on the X-axis and Sound on the Y-axis. 

To apply things automatically, click on "Presets & Settings" and select the options. For manual, just tap on the desired frequency and use the trackpad or mouse to change the sound.

Step 5. After completing the process, check the audio to see if the robotic tint is gone. Now, to export the audio, click on "File" > "Export" to see the available download options.

Isolate Vocals from Noise Online for Free

All of this may seem overwhelming if you are not into audio production or just want to remove robot voice from your audio for once. What if you can remove robotic sound from voice online for free with just simple steps? With EaseUS online Vocal Remover, you can improve your audio recording quality in seconds.

The AI-powered tool analyses the audio and removes the unwanted noise responsible for the robot's voice to generate a high-quality audio file. Additionally, you can use this tool to remove background music from video online free, separate vocals, karaoke, and acapella. You just have to upload the file and let the AI do the job.

Key Features of EaseUS Online Vocal Remover:

Final Words 

Robotic voice can be pretty irritating and ruins the entire audio or music file quality. There are many reasons that contribute to the overall robotic voice tint in the audio. Learn the recording tips and how to remove robot voice in Audacity by following the step-by-step guide.

The simplest method to remove robotic or metallic tint in your audio is to use the online vocal remover. All you need to do is upload the file and let the AI do its magic to enhance the audio quality.

FAQs About Remove Robot Voice in Audacity 

Here are some of the most frequent FAQs asked about removing robot voice using Audacity. I hope you find these queries helpful. 

1. How do I get rid of robotic tone?

The robotic tone is a mixture of unfriendly recording practices and post-processing effects. To get rid of it:

  • Record the audio in quiet environments and a good microphone.
  • Upload the audio to Audacity, and remove the unwanted noises using a Noise Reduction filter.
  • Apply EQ and Clip Fix to make the audio sound natural.
  • Export the audio file in the desired format.

2. How do I make my voice clear in Audacity?

  • Open Audacity and upload the audio file.
  • Open the "Effects" > "EQ and Filters" > "Filter Curve EQ."
  • Reduce the sounds for frequencies below 60 Hz using the graph.
  • Now, apply Bass and Treble boost to make your voice more clear.

3. How do I make my voice robotic in Audacity?

  • Launch Audacity and record your voice.
  • Copy the audio, go to "Tracks" > "Add New" > "Stereo Track," and duplicate the audio twice.
  • Now, use the time shifter tool to move the tracks ahead, and late by a second or so.
  • Preview the audio, and you will have your robot voice.

See this detailed YouTube Tutorial to make your voice robotic in Audacity.